Case Study Guide

Information That Should Always Be Included:

Diagnostic Testing

All diagnostic tests and procedures must be discussed in detail. You will need to include:

  • the type of test,
  • indications for the test,
  • equipment preparation,
  • patient preparation (including restraint),
  • obtaining the sample,
  • performing of the test,
  • any safety considerations & OHS considerations.

This can all be prepared as an appendix, as it will be information you use over and over in other case studies. Remember to discuss the process step-by-step and include as much detail as is possible.

You will also need to discuss:

  • results of the test,
  • normal parameters (where appropriate),
  • interpretation of the results and how the results influenced the management of this patient’s case.

Example of how to present blood results:


IDEXX Canine General Health Profile (Biochemistry)
Test Result Reference Range Findings if Abnormal
ALB - Albumin 23 g/L 127 -38 g/L
ALKP 158 U/L 23 – 212 U/L
ALT 75 U/L 10 – 100 U/L
AMYL - Amylase 1279 U/L 500 – 1500 U/L
Ca2+ - Calcium 2.02 mmol/L 1.98 – 3.00 mmol/L
CHOL - Cholesterol 3.64 mmol/L 2.84 – 8.27 mmol/L
UREA 2.3 mmol/L 2.5-9.6 mmol/L LOW
CREA - Creatinine 98 µmol/L 44 – 159 µmol/L
GLU - Glucose 5.17 mmol/L 4.28 – 6.94 mmol/L
PHOS - Phosphorus 1.74 mmol/L 0.81 – 2.19 mmol/L
TBIL –Bilirubin Unconjugated <2 µmol/L 0 – 15 µmol/L LOW
TP – Total Protein 53 g/L 52 – 82 g/L

Don’t forget to discuss the results.

The patient’s blood results were all within normal limits, except Urea which was slightly low. This was not deemed clinically significant by the surgeon.